Updated November 2026

A Craftsman cordless impact drill can drive screws, lag bolts and stubborn fasteners faster than most standard drills, but only if you match the tool to the job and use it correctly. This guide walks you through what a Craftsman cordless impact drill does well, how to pick the right model and battery, and the setup and driving steps that prevent stripped screws and broken bits. By the end, you should be able to choose a unit confidently and use it without damaging your material or your wrist.

What a Craftsman Cordless Impact Drill Actually Does

Many shoppers use the terms “drill” and “impact driver” interchangeably, but they work differently. A standard cordless drill applies steady rotational force through a keyed or keyless chuck, which suits drilling holes and driving screws where you want control over clutch slip. An impact driver adds a hammering mechanism that delivers short rotational bursts. That burst action helps it drive long fasteners into dense wood with less effort and reduces the twisting you feel in your hand.

Shopping for one? See our guide: 4 Best Cordless Impact Drill Driver Picks of 2026.

Craftsman sells both styles, and the product names on the box or in the listing tell you which one you are getting. Read the specification sheet before you buy, not just the marketing headline. For a broader comparison of the two tool types, see Drill vs Impact Driver: Which Do You Need? and Power Drill vs Impact Driver: Which One to Use and When.

Step 1: Confirm Your Battery Platform

Cordless tools are only convenient if the batteries work across your collection. Before choosing a Craftsman cordless impact drill, check which battery family it uses and whether you already own chargers or packs for that system. Craftsman has used several battery platforms over the years, and older packs are not always interchangeable with newer tools. If you are unsure, the tool’s packaging and manual list the compatible battery models.

Voltage is the other number to check. Higher-voltage packs generally provide more power and run longer under load, but they are heavier. For light assembly and furniture work, a lower-voltage tool is often easier to use all day. For framing, lag bolts and driving through hardwood, a larger battery pays off. You can read a practical breakdown of one line in Craftsman Cordless Drill Battery Review: Features and Performance.

Step 2: Match Torque and Speed to the Material

Manufacturers list maximum torque in inch-pounds or newton-meters, and most also give a no-load speed in RPM. Torque determines how hard the tool can drive a fastener before it stalls. Speed determines how quickly it drills. Neither number tells the full story, so compare them within the same tool category rather than across drill and impact models.

As a rough guide, softwoods and sheet goods need modest torque, while hardwoods, structural lumber and lag screws need more. Look for a variable-speed trigger and a selectable speed range (often a low setting for control and a high setting for speed). The lower range is what you want when driving screws near a finished surface, because it reduces the chance of cam-out and splitting.

Step 3: Set Up the Tool Before Your First Job

Good results start before the trigger is pulled. Use this short checklist to prepare:

  • Fully charge the battery, then let it cool to room temperature if it feels warm after charging.
  • Insert a bit that fits the fastener head snugly. Impact drivers typically use 1/4-inch hex shank bits.
  • Set the direction switch to forward for driving or reverse for removal.
  • Choose the speed range that matches the task.
  • Set the clutch or mode selector if the model has one, and test on scrap material first.
  • Wear eye protection and keep your hands clear of the bit path.

Impact drivers do not have a traditional clutch, so you control depth by feel and by using a shorter or longer driving burst. If you need precise depth control for finish work, a drill with a clutch is often the better choice. For an overview of chuck and bit compatibility, read Drill Chuck for Impact Driver: How to Choose and Fit One (2026).

Step 4: Drive Fasteners Correctly

Technique matters more than horsepower. Follow these steps for a clean result:

  1. Mark the fastener location and, for hardwood, drill a pilot hole sized to the screw’s shank diameter.
  2. Seat the bit fully in the screw head before pulling the trigger. A wobbling bit is the most common cause of stripped heads.
  3. Start the screw at low speed so it bites without skipping.
  4. Drive steadily, keeping the tool square to the surface.
  5. Stop when the head is flush or slightly below the surface, then check the depth.
  6. For removal, switch to reverse and use the same steady pressure.

Drilling Holes with an Impact Driver

Impact drivers can drill holes, but they are not designed for it. The percussive action can cause a bit to skate, and a standard keyless chuck adapter is usually needed to hold round-shank bits. If you regularly drill large holes, a drill with a keyless chuck is the more suitable tool, and a hammer drill is the right choice for masonry. The comparison in Hammer Drill or Impact Driver (2026): Which Should You Choose? covers this distinction in more detail.

Choosing the Right Craftsman Model

Use this table to compare the main features to look for. Check each specific model’s listing for exact figures, since specifications change between generations.

Feature What to Look For Best For
Battery voltage Higher voltage for heavy use; lower for light tasks Heavy framing vs. furniture assembly
Torque rating Higher inch-pound rating for driving long fasteners Decks, lag bolts, structural work
Speed settings Two-speed or variable trigger Control near finished surfaces
Chuck type 1/4-inch hex for impact; keyless chuck for drilling Mixed drilling and driving
Weight and length Compact body for tight spaces Overhead and cabinet work
Light and grip Built-in LED and rubberized grip Low-light and extended use

If you are building a full kit, consider a combo set so you can share batteries and chargers. A broader set guide is available at Milwaukee Drill and Impact Driver Set: How to Choose the Right Combo (2026), which applies the same logic to any brand.

Common Mistakes

  • Using too much speed for screws. High speed drives screws quickly but raises the risk of stripping and splitting. Start low.
  • Skipping pilot holes in hardwood. Dense wood splits easily, especially near edges.
  • Using worn bits. Rounded or chipped bit tips cause cam-out. Replace them early.
  • Driving at an angle. A tilted tool wears the bit and damages the head.
  • Ignoring battery condition. A weak pack loses power quickly under load. Rotate and retire old batteries.
  • Forgetting eye protection. Bits can snap and screws can spin off unexpectedly.

Tips for Longer Tool Life

Store batteries at room temperature and avoid leaving packs on the charger for days after they are full. Keep the chuck and vents free of dust, and use a dry cloth rather than solvents to clean the housing. When you buy accessories, choose bits from reputable manufacturers, since poorly machined hex shanks can wobble and wear out the tool’s drive.

  • Impact-rated driver bit set: Impact-rated bits are hardened to handle the hammering action without snapping. Look for a set that includes Phillips, square and Torx sizes. View on Amazon
  • Extra Craftsman-compatible batteries: A second pack lets you keep working while the first charges. Confirm the voltage and platform match your tool. View on Amazon
  • Pilot hole drill bit set: A matched set of wood bits helps you size pilot holes correctly for common screw gauges. View on Amazon
  • Safety glasses: Impact-rated eye protection guards against bit breakage and flying debris. View on Amazon

FAQ

Can a Craftsman cordless impact drill drill holes?

It can, but most impact drivers are designed for driving fasteners. For regular hole drilling, especially in metal or masonry, use a drill or hammer drill with a suitable chuck.

What is the difference between a drill and an impact driver?

A drill applies steady rotation and usually offers a clutch for depth control. An impact driver adds short rotational bursts that drive long screws with less effort and less hand twisting.

Do I need a special chuck for an impact driver?

Most impact drivers use a 1/4-inch hex shank. Bits fit directly, but a keyless chuck adapter is needed to hold round-shank drill bits.

How do I stop stripping screw heads?

Use a bit that fits the screw head, seat it fully before driving, start at low speed, and keep the tool square to the surface.

How long should a cordless impact drill battery last?

Runtime depends on the battery capacity, the task and the material. Lighter jobs last far longer than driving long fasteners into dense lumber. Manufacturers list capacity in amp-hours, which helps compare packs.

Can I use any Craftsman battery with my tool?

Only batteries from the same platform are compatible. Check the tool manual or packaging before buying a replacement pack.

When should I consult a professional?

If you are working on structural framing, electrical boxes, gas lines or load-bearing connections, consult a licensed contractor or inspector. Power tools are only one part of safe construction.

Conclusion

A Craftsman cordless impact drill is most useful when you match it to your battery platform, torque needs and typical materials. Set up the tool carefully, drive at the right speed, and use pilot holes in hardwood to protect your work. With the right bits and a clear idea of when an impact driver is the better tool, you can drive fasteners quickly and cleanly.

Emily Parker

About Emily Parker

Emily Parker is part of our editorial team and reviews and edits our power tools guides, checking product details against manufacturer specifications and owner feedback.