Updated November 2026

The difference between drill and impact driver comes down to how each tool delivers its turning force. A drill applies steady, adjustable torque, which suits drilling holes and driving screws with control. An impact driver adds rapid hammer-like bursts of rotational force, which makes it faster and more forceful for long fasteners. This guide explains how each works so you can pick the right one for the job.

How a Drill Delivers Torque

A standard drill (often called a drill driver) uses a geared chuck that grips round-shank bits. You set a clutch collar to limit torque, so the bit stops turning once the fastener reaches the depth you want. That clutch is what makes a drill the better choice for delicate work, such as seating screws flush in soft wood without stripping the head.

Shopping for one? See our guide: What Is Difference Between Impact Driver and Drill? 3 Best Picks Compared (2026).

Because the drill turns continuously, it holds steady pressure on the bit. This is why it handles wood, metal and masonry bits well when you drill a clean, straight hole.

How an Impact Driver Delivers Force

An impact driver uses an internal mechanism that strikes the output shaft in short, rotational impacts. Each impact gives the bit a burst of torque, and this happens thousands of times per minute according to most manufacturers’ specifications. The result is more driving force with less effort from you, especially on lag screws, deck screws and structural fasteners.

Impact drivers take 1/4-inch hex-shank bits, which lock in with a quick-release collet. The bit does not slip out under the rotational shock, which reduces cam-out and stripped screw heads.

Choosing the Right Tool for Your Task

Use this quick comparison when you are deciding:

Task Better Choice Why
Drilling holes in wood, metal or masonry Drill Steady torque and a keyless chuck for round bits
Driving many long deck or structural screws Impact driver Rotational impacts drive fasteners quickly
Driving small screws in cabinetry Drill Clutch control prevents overdriving
Removing stubborn or rusted fasteners Impact driver Impact bursts break loose seized threads
Mixing or stirring material Drill Continuous rotation with variable speed

If you are weighing tool types side by side, the guide on Power Drill vs Impact Driver: Which One to Use and When goes deeper into common job scenarios. For a broader look at uses, see What Is Impact Driver Drill Used For? Jobs, Uses and When to Pick One.

Checklist Before You Start a Job

  1. Identify the fastener type: round-shank screws and bits suit a drill; hex-shank bits suit an impact driver.
  2. Decide whether you need precise depth control (drill) or maximum driving force (impact driver).
  3. Check the bit and chuck compatibility before you buy accessories.
  4. Test on scrap material to set the torque clutch or confirm the impact driver will not overdrive the screw.

Common Mistakes to Avoid

  • Using an impact driver to drill a precise hole. The rotational force makes it harder to keep the bit centered.
  • Expecting a drill to match an impact driver’s speed on long structural screws.
  • Forgetting that impact drivers need hex-shank bits, which may require an adapter for round-shank bits.
  • Overtightening small screws with the impact driver, which can snap the head or crack the material.
  • A quality drill driver with a clutch: useful for controlled screwing and general drilling. View on Amazon
  • A compact impact driver: useful for high-torque fastening in tight spaces. View on Amazon
  • A hex-shank bit set: useful for matching impact driver bits and reducing stripped screws. View on Amazon

FAQ

Can an impact driver drill holes?

It can drill small pilot holes, but it lacks the precise control a drill offers. For clean, accurate holes, a standard drill is the better choice.

Can a drill replace an impact driver?

For light screwing, yes. For long structural fasteners or stubborn bolts, a drill often stalls, while an impact driver keeps driving.

Do I need both tools?

Many home users benefit from owning both, since each handles tasks the other does poorly. If you only buy one, choose based on your most frequent job.

Conclusion

A drill gives you controlled, steady torque for holes and precise screwing, while an impact driver delivers fast, forceful bursts for heavy fastening. Match the tool to the fastener and the job, and you will avoid stripped screws and wasted effort. When in doubt, test on scrap material first.

Emily Parker

About Emily Parker

Emily Parker is part of our editorial team and reviews and edits our power tools guides, checking product details against manufacturer specifications and owner feedback.