Updated November 2026
A charger for a Black and Decker cordless drill has to match your drill’s battery platform, voltage and connector style. Once you know the model number on your battery and the type of charger it uses, you can order the right replacement or confirm that the charger you already own will work. This guide walks through identifying your battery, checking compatibility, and deciding between an original replacement and an aftermarket option.
Why Matching the Charger Matters
Black and Decker has sold cordless drills across several battery generations, and the chargers are not always interchangeable. A charger built for one voltage or pack style may fit physically but fail to charge a different battery, or charge it improperly. Using the wrong charger can lead to slow charging, a battery that never reaches full capacity, overheating, or permanent damage to the cells. Manufacturers specify the exact charger model for each battery, so compatibility should be confirmed before you plug anything in.
Shopping for one? See our guide: Black and Decker Drill Cordless Review: Is It Worth It?.
Step 1: Identify Your Battery
Start with the battery pack, not the drill. The battery carries the information you need: voltage, capacity, and the model number printed on the label or molded into the housing.
- Remove the battery from the drill by pressing the release button and sliding it off the rail.
- Look at the label for the voltage, usually printed as a number followed by “V” (for example, 12V, 18V or 20V MAX).
- Find the model number, typically a string of letters and digits near the voltage or on the side of the pack.
- Note the rail or connector style. Black and Decker packs slide into a rail on the tool, and the shape of that rail varies between product lines.
- Check whether the battery shows a brand name such as Black and Decker, Dewalt-era packs or other compatible branding, since platform names affect which chargers fit.
Step 2: Confirm the Charger Type
Black and Decker chargers come in a few common styles. Some are simple wall-plug units with a single battery bay. Others are multi-port or fast chargers that accept more than one voltage. Read the label on the charger itself. It should list the input voltage (usually 120V AC for US outlets), the output voltage, and the battery voltages it supports.
| What to Check | Where to Find It | Why It Matters |
|---|---|---|
| Battery voltage | Label on the battery pack | Charger must match the battery voltage exactly |
| Model number | Battery label or charger label | Confirms the correct replacement part |
| Output rating | Charger label | Must support your battery’s voltage |
| Connector or rail style | Battery and charger bay | Determines physical fit |
| Input voltage | Charger label | Should be 120V AC for standard US outlets |
Step 3: Decide Between Original and Aftermarket
You have two broad choices. An original replacement charger from the manufacturer or an authorized parts source is the safest route, because it is built to the specification of your battery. An aftermarket charger can cost less and may be a reasonable option, but you should confirm that it lists your exact battery voltage and includes safety features such as overcharge and short-circuit protection. Owners often report that aftermarket units work well when the listing names the model number directly, and less reliably when the listing only says “compatible with Black and Decker.”
If you own a spare battery, you might also consider a newer charger from a platform that shares your battery style. Compatibility is never guaranteed across brands, so verify the voltage and connector before buying. For a broader look at how chargers are selected for different tools, see Charger for Cordless Drill: How to Pick, Match and Care for One (2026).
Step 4: Test the Charger and Battery
Once the charger arrives, test it before relying on it for a job.
- Plug the charger into a grounded 120V outlet. Do not use extension cords or power strips if you can avoid them.
- Insert the battery and watch the indicator light. Most chargers show a charging state, then a full or ready state.
- Let the battery charge completely. A typical charge time varies by battery capacity and charger rate, so consult the charger’s manual for the expected duration.
- Check that the battery and charger stay at room temperature. Warmth is normal during charging, but a hot battery or charger is a warning sign.
- Once charged, run the drill briefly to confirm the battery holds a useful charge under load.
Step 5: Store and Care for the Charger
Keep the charger in a dry area away from metal debris and sawdust. Unplug it when not in use if your model does not have a standby feature. Store batteries at room temperature rather than in a hot truck bed or freezing garage. Manufacturers generally recommend storing lithium-ion packs at partial charge for long idle periods, but check your battery’s instructions for the exact guidance.
Common Mistakes
- Buying by drill model instead of battery model. The charger depends on the battery, not the drill body. Two drills can share a battery platform, and one battery can fit several tools.
- Ignoring voltage. A charger rated for a different voltage may not charge the pack at all, or may charge it unsafely.
- Trusting a vague compatibility claim. Listings that say “fits Black and Decker” without a model number leave room for error.
- Leaving a charger plugged in on a damaged battery. If a pack gets hot, swells, smells or stops holding charge, stop using it and replace it.
- Using an extension cord with a long, thin gauge. This can slow charging and create heat. Use a short, properly rated cord or plug directly into the wall.
Tips for a Smooth Replacement
- Photograph the battery label before you shop so you have the model number on hand.
- If your charger is working but slow, check the outlet and cord before assuming the charger has failed.
- Keep the original box and manual for warranty questions.
- If you own multiple batteries, label them by voltage so you do not mix them up.
- For a general overview of Black and Decker cordless tools and their batteries, read Black and Decker Cordless Drill Battery Charger: Step-by-Step Guide (2026).
Recommended gear
A few supplies make it easier to identify, test and store your charger and battery safely.
- Multimeter helps you check the battery voltage and confirm it matches the charger’s rating before you buy a replacement. View on Amazon
- Surge-protected power strip offers a safer place to plug in a charger than an overloaded outlet, though a direct wall connection is usually best. View on Amazon
- Battery storage case keeps spare packs separated and protected from metal objects that could short the terminals. View on Amazon
FAQ
Can I use any Black and Decker charger with my drill?
No. The charger must match the battery’s voltage and connector style. Check the battery label and the charger label before using them together.
Where is the model number on a Black and Decker battery?
It is usually printed on the label on the side or top of the pack, often near the voltage rating. Some older packs show it on the rail or the bottom of the housing.
Why won’t my battery charge in the charger?
Check the outlet, confirm the charger and battery voltages match, clean the contacts, and make sure the battery is seated fully. If the battery still will not charge, it may have reached the end of its life.
Is an aftermarket charger safe?
It can be, if it lists your exact battery model and includes overcharge and short-circuit protection. Avoid listings that give only a general compatibility claim.
How long should a charge take?
Charge time depends on battery capacity and the charger’s rate. Consult the charger’s manual for the specific expected time.
Can I charge a battery in a hot or cold garage?
Charging works best at room temperature. Many manufacturers recommend charging only within a moderate temperature range, so avoid very hot or freezing spaces.
When should I replace a battery instead of the charger?
If the battery swells, overheats, emits an odor, or no longer holds a useful charge after a full cycle, replace the battery. A failing battery can be a safety hazard, so consult a professional or the manufacturer if you are unsure.
Conclusion
Finding the right charger for a Black and Decker cordless drill comes down to reading the battery label, confirming voltage and connector style, and choosing a replacement that names your exact model. Test the setup before you rely on it, and store both charger and battery carefully. With those steps, you can get back to work without guessing.

