Updated November 2026
Choosing the best Makita impact driver comes down to three things: the battery platform you already own or plan to buy into, the torque and speed range you actually need, and whether you want a full kit or a bare tool. This guide compares three Makita impact drivers and one bit set that pairs well with them. Our selection method is research-based. We looked at manufacturer specifications, Makita’s reputation for build quality across its LXT and compact lines, and the patterns that show up repeatedly in owner feedback, such as battery life, noise, and bit retention.
Our top picks at a glance
- 1
TOP CHOICEBest overallMakita XDT131 18V LXT Brushless Impact Driver Kit (3.0Ah)View on Amazon - 2
Best for compact jobsMakita TD022DSE 7.2V Lithium-Ion 1/4" Hex Impact Driver KitView on Amazon - 3
Best bit set companionMakita E-01644 Impact XPS 60 Piece Impact Bit SetView on Amazon
Our Top Picks
Quick Comparison
| Product | Best for | Key feature |
|---|---|---|
| Makita XDT131 18V LXT Brushless Impact Driver Kit (3.0Ah) | General construction, decking and framing | Brushless motor on the 18V LXT platform |
| Makita TD022DSE 7.2V Lithium-Ion 1/4″ Hex Impact Driver Kit | Tight spaces, cabinetry and light assembly | Compact body and light weight |
| Makita E-01644 Impact XPS 60 Piece Impact Bit Set | Anyone who needs a wide range of driving tips | 60-piece assortment of impact-rated bits |
Makita XDT131 18V LXT Brushless Impact Driver Kit (3.0Ah)
Best for: Best overall for general construction and repeat fastening work.
This is the kit most users reach for when they want one Makita impact driver that handles framing, decking, and cabinet installation without much compromise. It suits anyone already invested in the 18V LXT battery line or planning to build out a cordless system around it.
Key specs
- 18V LXT lithium-ion platform
- Brushless motor
- 3.0Ah battery included in the kit
- 1/4″ hex quick-change chuck
Pros
- Brushless motor generally delivers longer run time and less heat buildup than brushed alternatives
- Shares batteries with a large LXT tool lineup, so one battery can power drills, saws and lights
- Owners often report strong driving power in dense lumber and lag bolt work
Cons
- Heavier and longer than compact models, which can be tiring overhead
- Full-size body may not fit into very tight cabinet openings
Bottom line: The safest choice for most homeowners and tradespeople who want a dependable, full-size Makita impact driver that will grow with a battery platform.
View on AmazonMakita TD022DSE 7.2V Lithium-Ion 1/4″ Hex Impact Driver Kit
Best for: Best for compact jobs in tight spaces and light assembly.
This compact Makita impact driver is aimed at people who spend most of their time in cabinets, under counters, or on furniture assembly. It is also a practical second tool for electricians and HVAC installers who need something smaller than a standard driver for overhead or confined work.
Key specs
- 7.2V lithium-ion battery system
- 1/4″ hex chuck
- Compact, lightweight body
Pros
- Noticeably lighter and shorter than full-size 18V drivers, which reduces fatigue on repetitive screws
- Fits into tight openings where a standard impact driver cannot reach
- Good choice as a secondary tool for light fastening tasks
Cons
- Lower voltage means less torque for structural or dense-wood work
- The 7.2V battery platform is separate from the 18V LXT line, so it does not share packs with larger Makita tools
Bottom line: A good fit for cabinet installers, furniture assemblers, and anyone who needs a small second driver rather than a main workhorse.
View on AmazonMakita E-01644 Impact XPS 60 Piece Impact Bit Set
Makita E-01644 Impact XPS 60 Piece Impact Bit Set | Driver Bits, Screwdriver Bit Sets, Impact Driver Bits, Fastening Accessories, Bits feature precision machined tips
Best for: Best bit set companion for users who need a wide range of driving tips.
This is not an impact driver, but it is a useful companion for any Makita driver. Impact-rated bits are designed to hold up under the hammering action of an impact driver, and a 60-piece assortment covers most fastening tasks around the house and job site.
Key specs
- 60-piece impact bit assortment
- Precision machined tips, as described in the listing
Pros
- Wide variety of drive types covers most common fasteners
- Impact-rated construction is better suited to impact drivers than standard bits
- Includes a range of sizes for different screw lengths and head types
Cons
- Large sets can be bulky to store, and some users prefer a smaller kit with only the bits they use
- Individual bits may wear faster than premium single-bit options if used heavily on hardened fasteners
Bottom line: Worth adding if you already own a Makita impact driver and find yourself switching bits often. Skip it if you already have a complete set.
View on AmazonBuying Guide
Battery platform and voltage
Voltage determines the torque ceiling and the size of the tool. 18V and 20V-class platforms, including Makita’s LXT line, suit framing, decking, and lag bolts. 7.2V and similar low-voltage platforms suit cabinetry and light assembly. Before buying, check which battery packs you already own, because staying within one platform saves money over time and reduces the number of chargers on the shelf.
Good picks for this: Makita XDT131 18V LXT Brushless Impact Driver Kit, Makita TD022DSE 7.2V Lithium-Ion 1/4″ Hex Impact Driver Kit
Motor type: brushed vs. brushless
Brushless motors are generally more efficient, produce less heat, and tend to deliver longer run time per charge than brushed motors. Makita’s brushless models are the ones most often recommended for heavy daily use. For occasional light work, a brushed motor is usually adequate and may keep the tool lighter and simpler.
Good picks for this: Makita XDT131 18V LXT Brushless Impact Driver Kit
Size and weight
Measure the tightest space you expect to work in before buying. Full-size drivers are typically around 6 to 7 inches long; compact models are noticeably shorter. Weight matters too. If you will drive hundreds of screws overhead, a lighter tool reduces fatigue, even if it gives up some torque.
Good picks for this: Makita TD022DSE 7.2V Lithium-Ion 1/4″ Hex Impact Driver Kit
Chuck and bit compatibility
Most Makita impact drivers use a 1/4″ hex quick-change chuck, which accepts standard hex-shank bits. Confirm the chuck size on any model before buying. Impact-rated bits are specifically built for the hammering action of an impact driver, and using standard bits can cause chipping or slipping.
Good picks for this: Makita E-01644 Impact XPS 60 Piece Impact Bit Set
Torque and use case
Impact drivers deliver high torque in short bursts, which makes them well suited to driving long screws and lag bolts. They are less suited to precise, low-torque work such as delicate electronics, where a drill driver with a clutch gives more control. Match the tool to the job rather than assuming more torque is always better.
Good picks for this: Makita XDT131 18V LXT Brushless Impact Driver Kit, Makita TD022DSE 7.2V Lithium-Ion 1/4″ Hex Impact Driver Kit
Durability and build quality
Look for a metal gearcase, a sturdy trigger, and a belt clip that holds firmly. Owners of Makita tools often mention long service life when the tool is kept clean and the battery terminals are free of debris. Check that the battery latches securely, as a loose pack can disconnect under load.
Good picks for this: Makita XDT131 18V LXT Brushless Impact Driver Kit
Care and maintenance
Store batteries at moderate room temperature and avoid leaving packs on the charger for long periods after they are full. Keep the air vents clear of sawdust and drywall dust. Replace worn bits before they round off fastener heads, and keep a small cleaning brush in the case to clear the chuck.
Good picks for this: Makita E-01644 Impact XPS 60 Piece Impact Bit Set
FAQ
What is the best Makita impact driver for a homeowner?
For most homeowners, the Makita XDT131 18V LXT Brushless Impact Driver Kit is the most versatile choice. It handles deck screws, lag bolts and general assembly, and the battery can be shared with other LXT tools.
Is a compact Makita impact driver powerful enough for construction work?
Compact 7.2V models are designed for light fastening and tight spaces. For framing, decking or structural lag bolts, a full-size 18V driver is generally the better match.
Do I need impact-rated bits with a Makita impact driver?
Yes, it is strongly recommended. Impact-rated bits are built to withstand the hammering action of an impact driver. Standard bits can chip or slip, which can damage both the bit and the fastener head.
What is the difference between an impact driver and a drill driver?
An impact driver delivers high torque in short rotational bursts, which makes it efficient for long screws and lag bolts. A drill driver uses a clutch and provides more control for precise work, drilling holes and driving smaller fasteners.
How long does a Makita impact driver battery usually last?
Run time depends on the battery capacity, the task and the motor type. Brushless models with larger packs, such as 3.0Ah, generally run longer per charge than smaller packs under similar loads. Actual performance varies with the work you do.
Can I use a Makita impact driver for drilling holes?
Impact drivers are not designed for drilling holes in most materials. A drill driver with a keyless chuck is the better tool for drilling. Using an impact driver for drilling can damage bits and produce uneven holes.
Should I buy a bare tool or a kit?
If you already own a battery and charger from the same platform, a bare tool can save space and keep the kit cost lower. If you are starting fresh, a full kit with batteries and a charger is usually the more practical choice.
Conclusion
The best Makita impact driver for most people is the Makita XDT131 18V LXT Brushless Impact Driver Kit, because it offers full-size torque, a brushless motor and a battery platform that supports many other tools. If space is tight or you mostly do light assembly, the Makita TD022DSE 7.2V compact kit is a practical alternative. Pair either driver with the Makita E-01644 Impact XPS 60 Piece Impact Bit Set to cover a wide range of fasteners. For more background, see Makita 18 Volt Impact Driver: How to Choose and Use One (2026) and Milwaukee Power Tools Impact Driver: 6 Best Picks for Every Job (2026).
Sources
- Workplace power tool safety guidance, including hand and portable power tool requirements (osha.gov)
- Consumer product safety information on cordless power tools and battery handling (cpsc.gov)
- Background on battery technology and lithium-ion care that applies to cordless tool packs (energy.gov)

