Updated November 2026

Drilling holes with impact driver is a common shortcut on job sites and in home workshops, but the bit you attach matters as much as the driver. A standard hole saw can bind, wobble or strip under the sharp, rotational hammering an impact driver delivers. This list is built for people who want a hole saw that holds up to that kind of torque and gives clean cuts in thin metal, PVC, wood or drywall. Selection criteria: impact-rated construction, shank compatibility with a 1/4-inch hex driver, cutting material, hole sizes offered, and owner feedback patterns on cut quality and durability. This is a research-based guide, not a record of hands-on testing.

Our top picks at a glance

  1. 1KATA 3-Piece M42 Thin Wall Hole Saw Kit Hole Saw Set for Impact DriversTOP CHOICEBest overallKATA 3-Piece M42 Thin Wall Hole Saw Kit Hole Saw Set for Impact DriversView on Amazon
  2. 2Geinxurn 4PCS Impact Small Thinwall Hole Saw Kit, M42 Cobalt BI-MetalBest for thin metal and PVCGeinxurn 4PCS Impact Small Thinwall Hole Saw Kit, M42 Cobalt BI-MetalView on Amazon
  3. 3Milwaukee 49-56-9820 Shockwave 1-1/8" Impact Hole SawBest for heavy-duty single-size cutsMilwaukee 49-56-9820 Shockwave 1-1/8" Impact Hole SawView on Amazon
  4. 4Bosch HTW78 7/8 In. Edge Impact Tough Hole SawBest for long-life wood and mixed materialsBosch HTW78 7/8 In. Edge Impact Tough Hole SawView on Amazon

Our Top Picks

Product Best for Key feature
KATA 3-Piece M42 Thin Wall Hole Saw Kit Multi-size work in thin metal and PVC Three sizes with 1/4-inch hex shank
Geinxurn 4PCS Impact Small Thinwall Hole Saw Kit Small thin-wall holes in metal, wood and drywall Four-piece kit with pilot bit and hex key
Milwaukee 49-56-9820 Shockwave 1-1/8″ Impact Hole Saw Single larger hole in heavy material Shockwave impact-rated design
Bosch HTW78 7/8 In. Edge Impact Tough Hole Saw Clean cuts in wood and mixed materials Impact Tough edge geometry

KATA 3-Piece M42 Thin Wall Hole Saw Kit Hole Saw Set for Impact Drivers

KATA 3-Piece M42 Thin Wall Hole Saw Kit Hole Saw Set for Impact Drivers | Hole Cutter Drill Bit with 1/4" Hex Shank, Fast Burr-Free Holes in PVC, Thin-Gauge Metal, Includes 7/8, 1-1/8, 1-3/8 in Sizes

KATA 3-Piece M42 Thin Wall Hole Saw Kit Hole Saw Set for Impact Drivers | Hole Cutter Drill Bit with 1/4" Hex Shank, Fast Burr-Free Holes in PVC, Thin-Gauge Metal, Includes 7/8, 1-1/8, 1-3/8 in Sizes

View on Amazon

Best for: Multi-size work in thin metal and PVC

This kit suits someone who regularly needs a few standard sizes for electrical boxes, plumbing or cable pass-throughs and wants them in one set rated for impact drivers.

Key specs

  • M42 cobalt bi-metal cutting edge
  • 1/4-inch hex shank for impact driver chucks
  • Three sizes: 7/8, 1-1/8 and 1-3/8 inch

Pros

  • Covers three common sizes in one kit
  • Hex shank fits impact driver collets directly
  • Thin-wall design reduces cutting resistance in sheet metal

Cons

  • Thin-wall profile is less suited to thick structural steel
  • Owners often recommend slower speeds to avoid chatter in thick material

Bottom line: A strong pick for electricians and HVAC installers who want several sizes without buying separate saws.

View on Amazon

Geinxurn 4PCS Impact Small Thinwall Hole Saw Kit, M42 Cobalt BI-Metal 7/8″, 1-1/8″, 1-3/8″ Hole Cutter Set with Pilot Drill Bit & 1 PC Hex Key

Geinxurn 4PCS Impact Small Thinwall Hole Saw Kit, M42 Cobalt BI-Metal 7/8", 1-1/8", 1-3/8" Hole Cutter Set with Pilot Drill Bit & 1 PC Hex Key, Fast Cutting for Thin Metal, Wood, PVC, Drywall

Geinxurn 4PCS Impact Small Thinwall Hole Saw Kit, M42 Cobalt BI-Metal 7/8", 1-1/8", 1-3/8" Hole Cutter Set with Pilot Drill Bit & 1 PC Hex Key, Fast Cutting for Thin Metal, Wood, PVC, Drywall

View on Amazon

Best for: Small thin-wall holes in metal, wood and drywall

Someone who wants a compact four-piece kit with a pilot bit included, for mixed-material jobs where the holes are small and the material is not very thick.

Key specs

  • M42 cobalt bi-metal construction
  • Sizes listed: 7/8, 1-1/8 and 1-3/8 inch, plus a pilot drill bit
  • Includes a hex key for changing saws

Pros

  • Pilot bit helps start cuts accurately
  • Good coverage for thin metal, PVC and drywall
  • Hex key included for quick changes

Cons

  • Owner feedback on long-term durability varies by user and material
  • Thin-wall design is not intended for heavy gauge steel

Bottom line: A practical choice for DIYers and light trades who need a few small holes across several materials.

View on Amazon

Milwaukee 49-56-9820 Shockwave 1-1/8″ Impact Hole Saw

Milwaukee 49-56-9820 Shockwave 1-1/8" Impact Hole Saw

Milwaukee 49-56-9820 Shockwave 1-1/8" Impact Hole Saw

View on Amazon

Best for: Single larger hole in heavy material

A tradesperson who needs one dependable 1-1/8 inch hole in tougher material and wants a saw marketed specifically for impact drivers.

Key specs

  • 1-1/8 inch cutting diameter
  • Shockwave impact-rated design, per manufacturer

Pros

  • Built specifically for impact driver use
  • Single-size focus suits repeat work at one diameter
  • Well-known brand with broad replacement availability

Cons

  • Single size means additional saws are needed for other holes
  • Owners sometimes note a higher-torque driver setting is needed for dense material

Bottom line: Best for electricians and plumbers who repeatedly cut the same larger hole in demanding material.

View on Amazon

Bosch HTW78 7/8 In. Edge Impact Tough Hole Saw

Bosch HTW78 7/8 In. Edge™ Impact Tough™ Hole Saw

Bosch HTW78 7/8 In. Edge™ Impact Tough™ Hole Saw

View on Amazon

Best for: Clean cuts in wood and mixed materials

A carpenter or remodeler who cuts a 7/8 inch hole in wood, plywood or softer composites and wants a saw that resists the edge chipping and binding common with impact use.

Key specs

  • 7/8 inch cutting diameter
  • Impact Tough edge design, per manufacturer

Pros

  • Impact Tough design aims to reduce edge damage
  • Clean exit cuts in wood are commonly reported by owners
  • Bosch brand support and accessories are widely available

Cons

  • Single size; additional saws needed for other diameters
  • Not designed for thin-wall metal, where dedicated thin-kerf saws perform better

Bottom line: A solid choice for woodworkers and framers who want durable 7/8 inch holes with an impact driver.

View on Amazon

Buying Guide

Shank compatibility

Most impact drivers accept a 1/4-inch hex shank, so confirm the saw or arbor has that shape before buying. A round-shank hole saw will not seat in an impact driver’s quick-change collet. If you are unsure, check the driver’s chuck specification and the hole saw’s listed shank.

Good picks for this: KATA 3-Piece M42 Thin Wall Hole Saw Kit, Geinxurn 4PCS Impact Small Thinwall Hole Saw Kit

Cutting material and tooth design

M42 cobalt bi-metal is a common high-performance option for hole saws, with the cutting edge designed to hold up better than basic high-speed steel in metal. Thin-wall profiles reduce cutting resistance in sheet metal and PVC. Choose the design that matches your primary material.

Good picks for this: Geinxurn 4PCS Impact Small Thinwall Hole Saw Kit, KATA 3-Piece M42 Thin Wall Hole Saw Kit

Hole size and sizing range

Think about how many different diameters you need. Kits give you flexibility across sizes like 7/8, 1-1/8 and 1-3/8 inch. Single-size saws are often easier to match to a specific job, such as a repeated 1-1/8 inch cut for a fixture or fitting.

Good picks for this: KATA 3-Piece M42 Thin Wall Hole Saw Kit, Milwaukee 49-56-9820 Shockwave 1-1/8″ Impact Hole Saw

Material thickness

Thin-wall saws are built for sheet metal, PVC and drywall. For thicker stock, a standard or heavier-duty saw is generally more appropriate. Cutting thick material with a thin-wall saw can cause chatter or overheating, so match the saw to the stock you are drilling.

Good picks for this: Milwaukee 49-56-9820 Shockwave 1-1/8″ Impact Hole Saw, Bosch HTW78 7/8 In. Edge Impact Tough Hole Saw

Driver speed and torque

Impact drivers deliver high rotational force with percussive hits. Start at a lower speed setting, use the pilot bit to locate the center, and apply steady pressure. Excessive force can cause the saw to bind or the shank to slip. Keep the driver aligned straight into the work.

Good picks for this: Milwaukee 49-56-9820 Shockwave 1-1/8″ Impact Hole Saw, Geinxurn 4PCS Impact Small Thinwall Hole Saw Kit

Pilot bits and centering

A pilot bit keeps the saw from walking across the surface before the teeth bite. Mark the center, start the pilot, then advance the saw. Some kits include a pilot bit and hex key, which saves a separate purchase and helps with quick blade changes.

Good picks for this: Geinxurn 4PCS Impact Small Thinwall Hole Saw Kit, KATA 3-Piece M42 Thin Wall Hole Saw Kit

Care and durability

Clear chips often, avoid overheating by pausing during long cuts, and use cutting fluid in metal. Store saws in a dry case so the teeth do not chip. A saw’s life depends heavily on the material and how it is used, so expect wear to vary.

Good picks for this: Bosch HTW78 7/8 In. Edge Impact Tough Hole Saw, Milwaukee 49-56-9820 Shockwave 1-1/8″ Impact Hole Saw

FAQ

Can you use any hole saw with an impact driver?

Not always. The saw needs a shank that fits the driver’s chuck, usually a 1/4-inch hex. Round-shank hole saws require an arbor adaptor. Check compatibility before you buy.

Is an impact driver better than a regular drill for hole saws?

An impact driver delivers high torque, which can help with larger saws, but it also hits in short bursts that can chip teeth. A drill with a clutch and variable speed often gives more control. Many people use an impact driver for quick, smaller holes and a drill for precision.

What speed should I use with an impact driver on a hole saw?

Start on a lower speed setting and increase only if the cut is steady. Manufacturers generally recommend slower speeds for larger diameters and harder materials to reduce heat and tooth damage.

Do I need a pilot bit?

A pilot bit is strongly recommended. It locates the center and stops the saw from wandering. Kits that include one are convenient, especially for thin metal and drywall.

What is the best hole saw for thin metal?

Thin-wall hole saws with cobalt or bi-metal teeth are generally used for sheet metal and electrical boxes. Choose a size range that matches your fittings and check that the shank is 1/4-inch hex.

Can I cut wood with a metal hole saw?

Often yes, but a wood-optimized saw cuts cleaner and wears less. Metal-focused saws can leave rougher edges in wood and may bind if the teeth are too aggressive for the grain.

Should I use cutting oil?

For metal, cutting fluid helps reduce heat and extend tooth life. For wood, dry cutting is usually fine. Always follow the saw manufacturer’s guidance.

Conclusion

For drilling holes with impact driver jobs, the right saw depends on your material and hole count. The KATA kit suits electricians who need several sizes, the Geinxurn kit fits light DIY and thin-metal work, the Milwaukee Shockwave 1-1/8 inch saw is aimed at repeat cuts in tougher material, and the Bosch 7/8 inch saw suits wood and mixed-material work. Match shank, size and material thickness first, then choose the brand that fits your workflow.

Sources

Emily Parker

About Emily Parker

Emily Parker is part of our editorial team and reviews and edits our power tools guides, checking product details against manufacturer specifications and owner feedback.