Updated November 2026

A cordless Makita impact drill gives you a compact, high-torque tool for driving screws, lag bolts and stubborn fasteners without the kickback of a standard drill. This guide walks through how to pick the right model for your work, set it up safely and use it for common jobs. Most of the skill comes down to matching the tool to the task and controlling the impacts.

Choose the Right Makita Impact Drill for Your Work

Makita sells impact drills across several battery platforms, and the battery voltage is the first decision. Higher-voltage packs generally deliver more torque for lag bolts and structural fasteners, while lower-voltage models are lighter for overhead work and trim. Check whether you already own batteries in the same platform before buying, since a new battery can cost more than the tool itself.

Shopping for one? See our guide: 4 Best Cordless Impact Drill Driver Picks of 2026.

Pay attention to the chuck as well. A hex-shank bit holder accepts impact-rated driver bits directly, which is what most impact work calls for. Standard keyless chucks are better suited to drilling holes in wood or metal.

Set Up the Drill Before Use

  1. Charge the battery fully and confirm the LED indicator shows a complete charge.
  2. Insert an impact-rated bit into the hex holder and pull the bit to confirm it is seated.
  3. Select the speed or mode setting. Use low speed for seating screws and high speed for drilling.
  4. Set the torque or clutch ring if your model has one, starting at a low setting.
  5. Wear eye protection and keep hands clear of the bit path.

Drive Fasteners Without Stripping or Overdriving

The impact mechanism delivers rotational bursts rather than steady torque. Start each fastener at low speed to get the bit seated, then increase speed only if the screw is moving freely. Hold the drill straight, with the bit perpendicular to the surface, so the head seats flush.

For wood screws, stop when the head sits flush. Impact drivers can sink a screw through a thin board in a fraction of a second, so pull the trigger in short bursts and check progress often. For lag bolts, predrill a pilot hole sized for the shank, then drive the bolt in controlled stages.

Drill Holes and Switch Tasks Safely

Drilling with an impact drill works best in masonry, steel and dense material when the impact function is engaged. Switch the mode selector to drill-only for wood, thin metal and tile, since hammering action can crack or chip those materials. Use a sharp bit, apply steady pressure and let the tool do the work.

When changing bits, release the trigger and let the chuck stop before removing anything. Keep the battery removed while swapping bits in situations where the tool may restart unexpectedly.

Common Mistakes to Avoid

  • Using a keyless-chuck bit in the hex holder, which can slip and damage the bit.
  • Running at full speed on screws, which strips heads and overdrives fasteners.
  • Forgetting that impact mode can crack tile, glass or thin wood.
  • Leaving the clutch or torque setting at maximum on finish work.
  • Skipping pilot holes for hardwood and lag bolts, which causes splitting.
  • Impact-rated driver bit set: Bits built for impact use hold their shape under repeated hammering and resist cracking. View on Amazon
  • Magnetic bit holder: Keeps screws aligned at the start of a drive, reducing cam-out on overhead and tight-space work. View on Amazon
  • Spare Makita-platform battery: A second pack lets you keep working while the first charges. View on Amazon

FAQ

Can I use a cordless Makita impact drill for drilling holes?

Yes, but switch to drill-only mode for wood, tile and thin metal. Impact mode is best reserved for masonry, steel and fastener driving.

What bits should I use in an impact drill?

Use impact-rated driver bits in the hex holder. Standard drill bits with round shanks can slip or break under impact loads.

Do I need to predrill for every screw?

Not for soft wood and drywall screws, but predrilling is recommended for hardwood, lag bolts and any fastener near the edge of a board to prevent splitting.

Conclusion

A cordless Makita impact drill rewards careful setup: match the battery platform, pick impact-rated bits and start every fastener at low speed. Switch modes for the material in front of you and back off the torque on finish work. With those habits, the tool handles heavy fastening and everyday drilling with far less effort.

Emily Parker

About Emily Parker

Emily Parker is part of our editorial team and reviews and edits our power tools guides, checking product details against manufacturer specifications and owner feedback.