Updated November 2026
A cordless drill and drill bit set gives you one tool that handles most household drilling and driving jobs, along with the bits to match wood, metal, masonry and tile. This guide walks through how to pick the right combination, which bit types cover which materials, and how to use the set safely so you get clean holes and fewer broken bits. By the end, you should be able to judge a kit on its merits rather than its box count.
Start With the Jobs You Actually Do
Before comparing kits, list the work you expect to do over the next year. A cordless drill and drill bit set for hanging shelves and assembling furniture needs very different contents from one aimed at mounting a TV on masonry or building a deck. Many shoppers buy a large bit count they never use, while missing the two or three bit types their projects demand.
Shopping for one? See our guide: 7 Best Cordless Drill and Drill Set Options for Home Use (2026).
Think in three categories: driving screws, drilling wood and metal, and drilling masonry or tile. Most home kits cover the first two well. Masonry work usually requires a hammer-capable drill or a dedicated masonry bit set, so check that before assuming a standard kit will handle brick or concrete anchors.
Check the Drill Itself
The drill is the part you will use every time, so its specs matter more than the number of bits in the case. Look at these points:
- Voltage: Common cordless platforms are 12V for compact, light work and 18V or 20V Max for heavier tasks. Higher voltage generally means more torque for larger holes and tougher materials.
- Chuck type: A keyless chuck tightens by hand and suits most bits. Some kits use a hex-shank impact driver, which takes quarter-inch hex bits and does not fit the same way.
- Clutch settings: A clutch with multiple torque positions protects screws from being overdriven. Look for at least 15 settings if you do a lot of fastening.
- Speed range: Two-speed gearboxes let you run slow for driving and fast for drilling. Single-speed tools work but feel less versatile.
- Battery: Confirm whether the battery and charger are included. Some sets ship as a bare tool, which changes the total value considerably.
If you are still deciding between drill styles, How to Choose a Cordless Drill for Home Use covers the trade-offs in more depth, and How to Evaluate a Cordless Drill Before You Buy offers a checklist you can use in the store or on a product page.
Match the Drill Bit Set to Your Materials
A good drill bit set is organized around materials. Each bit type has a geometry designed for a specific job, and using the wrong one is the fastest way to ruin a bit or a workpiece.
| Material | Recommended bit type | Notes |
|---|---|---|
| Softwood and plywood | Brad-point or spade bits | Brad points keep the bit centered; spade bits clear large holes quickly. |
| Hardwood | Brad-point or twist bits, sharp | Run slower and clear chips often to avoid burning. |
| Sheet metal and thin steel | Cobalt or high-speed steel twist bits | Use cutting oil and a slow speed to reduce heat. |
| Masonry, brick and concrete | Carbide-tipped masonry bits | Use hammer mode if your drill has it; do not force the bit. |
| Ceramic and porcelain tile | Diamond-tipped or tile bits | Start with a slow speed and add water to keep the bit cool. |
| Driving screws | Phillips, Torx or square driver bits | Match the bit tip exactly to the screw head. |
For a fuller breakdown of bit geometry, see Drill Bit Types: Which Bit for Wood, Metal, Masonry and Tile. If you need a bigger assortment, Best Drill Bit Sets for Wood, Metal and Masonry compares sets built around those materials.
Check Bit Quality, Not Just Quantity
Look for titanium-coated or cobalt bits for metal, and carbide tips on masonry bits. Bits labeled only as “steel” will dull quickly on harder materials. Many kits also include a bit index case, which keeps sizes organized and reduces lost bits.
Step-by-Step: Drilling a Clean Hole
Once you have the right tool and bit, follow this sequence for consistent results:
- Mark the spot. Use a pencil or a center punch. On metal, the punch dimple keeps the bit from wandering.
- Select the bit. Match the bit type to the material from the table above.
- Set the drill mode. Use drill mode for wood and metal, and hammer mode only for masonry.
- Set the speed. Start slow to seat the bit, then increase speed once it is cutting.
- Drill straight. Hold the drill square to the surface and apply steady, moderate pressure.
- Clear chips. Back the bit out every half-inch or so on deep holes, especially in metal.
- Finish the hole. Ease off pressure as the bit breaks through to prevent tear-out.
Driving Screws Without Stripping Them
Set the clutch to a low number and increase gradually. Keep the driver bit fully seated in the screw head, and apply firm forward pressure while the drill runs slowly. Most stripped screws come from high torque settings on soft materials or a worn bit tip.
Common Mistakes to Avoid
- Using a wood bit on metal. Wood bits lack the hardness and geometry for steel and will dull or break.
- Running masonry bits in drill-only mode. Without hammering action, the bit grinds instead of chipping, which overheats the carbide tip.
- Forcing the drill. Pushing hard rarely speeds up the job and often snaps bits or binds the motor.
- Skipping pilot holes. Driving screws into hardwood without a pilot causes splitting.
- Ignoring the clutch. A high clutch setting strips screws and can damage the workpiece.
- Letting bits get dull. Dull bits smoke, wander and burn. Replace them before they fail.
Tips for Getting More From Your Set
- Keep bits in their index case so you can see at a glance what is missing.
- Store batteries at room temperature and charge them after use rather than leaving them deeply discharged.
- Use a drill bit sharpener or replace worn twist bits in pairs so you do not mix sharp and dull sizes.
- Label bits or cases if you share the tool with others.
Recommended gear
These accessories are commonly used alongside a cordless drill and drill bit set and help with the tasks covered above.
- Center punch: A spring-loaded or hand center punch creates the dimple that keeps metal bits from skating across the surface. View on Amazon
- Titanium-coated twist bit set: Useful for drilling sheet metal and steel with less heat buildup than uncoated bits. View on Amazon
- Carbide masonry bit set: Designed for brick, block and concrete when paired with a hammer-capable drill. View on Amazon
- Bit index case: Keeps sizes organized and makes missing bits easy to spot. View on Amazon
FAQ
Is a cordless drill and drill bit set enough for home projects?
For most household jobs such as hanging shelves, assembling furniture and light woodworking, a standard set covers the needs. Masonry or heavy-duty work usually calls for extra specialized bits.
What size drill do I need for a typical home?
A compact 12V or 18V/20V drill handles most home tasks. Choose the higher voltage if you drill large holes or work with masonry regularly.
Can I use a regular twist bit on tile?
Standard twist bits will slip and wear quickly on tile. Use a diamond-tipped or dedicated tile bit, run at low speed, and keep the surface wet.
What is the difference between drill mode and hammer mode?
Drill mode rotates the bit only, which suits wood and metal. Hammer mode adds a rapid forward impact, which helps break up masonry and concrete when used with carbide bits.
Why does my drill bit keep breaking?
Common causes include forcing the drill, using the wrong bit for the material, running at too high a speed, and failing to clear chips. Dull bits also break more often.
How do I stop screws from stripping?
Lower the clutch setting, keep the driver bit fully seated, and use a pilot hole in hardwood. Replace worn driver tips that no longer grip the screw head.
Should I buy a set with a battery included?
If you already own batteries from the same platform, a bare-tool option can make sense. Otherwise, confirm the battery and charger are included so you can start working right away.
Do I need safety gear when drilling?
Yes. Wear eye protection at all times, and use hearing protection and a dust mask when drilling masonry or tile. If you are unsure about drilling into walls with wiring or plumbing, consult a licensed electrician or professional before starting.
Conclusion
A cordless drill and drill bit set works best when the drill’s torque and battery match your projects and the bits cover the materials you actually drill. Check the chuck, clutch and voltage first, then confirm the bit types for wood, metal, masonry and tile. Use the step-by-step method above and avoid the common mistakes, and your holes and screws will come out clean.

