Updated November 2026

A cordless drill is a battery-powered tool used mainly for boring holes and driving screws, and it’s the tool most people reach for first on home projects. This guide covers what a cordless drill is used for, the jobs it handles well, where it falls short, and how to match the right drill to your work. If you’re asking what is cordless drill used for, the short answer is: almost any task that involves making a hole or fastening something.

The Core Jobs a Cordless Drill Handles

Most cordless drills perform two basic functions. Drilling means rotating a bit to cut a hole in wood, metal, plastic or masonry. Driving means turning a screwdriver bit or nut driver to set fasteners. Many drills also include a clutch, which disengages the motor when a screw reaches a set depth so you don’t strip the head or split the material.

Shopping for one? See our guide: 4 Best Cordless Impact Drill Driver Picks of 2026.

Typical everyday uses include:

  • Hanging shelves, curtain rods and mirrors by drilling pilot holes and driving anchors
  • Assembling flat-pack furniture and cabinets
  • Building decks, fences and garden beds with exterior screws
  • Drilling pocket holes and dowel holes in woodworking projects
  • Drilling through metal studs, sheet metal and plastic trim

Using a Cordless Drill for Specialized Tasks

Beyond basic drilling and driving, a cordless drill can handle several accessory-based jobs. Adding the right bit or attachment expands what it can do without buying extra tools.

Mixing and Stirring

A drill fitted with a paddle mixer will blend thinset, joint compound, paint and epoxy. Run it at low speed to limit splashing and to avoid whipping air into the mix.

Cleaning and Scrubbing

Brush attachments turn a drill into a scrubber for grout lines, tubs and tile. Keep the speed moderate so the bristles do the work.

Drilling Masonry

A standard drill can drill light masonry, but a hammer-drill mode, found on many models, adds a rapid pounding action that makes concrete and brick far easier. Use carbide-tipped masonry bits and clear dust as you go.

How to Pick the Right Drill for Your Jobs

Match the drill to the work rather than the other way around. Consider these factors in order:

  1. Voltage: Lower-voltage (around 12V) drills are lighter and suit small jobs. Higher-voltage drills (18V to 20V class) have more torque for framing, decks and masonry.
  2. Torque and clutch settings: More clutch settings give finer control for delicate screws.
  3. Chuck size: A 1/2-inch keyless chuck accepts larger bits and is common on full-size drills.
  4. Battery platform: Choosing one brand’s batteries lets you share them across other tools.
Task Drill Type That Fits
Light furniture assembly Compact 12V drill/driver
Decking and framing Full-size 18V to 20V drill/driver
Concrete and brick Hammer drill with masonry bits
Mixing paint or mortar Drill with paddle mixer attachment

For a deeper comparison, see How to Choose a Cordless Drill for Home Use and Definition of Cordless Drill: What It Is and How It Works.

Common Mistakes and Tips

  • Don’t use high speed for driving screws. Slower speeds and a lower clutch setting prevent stripped heads.
  • Drill pilot holes in hardwood to avoid splitting.
  • Don’t confuse a drill with an impact driver. Impact drivers deliver rotational hammer blows for long lag screws; see What Is Difference Between Impact Driver and Drill? 3 Best Picks Compared (2026).
  • Wear eye protection and hearing protection, especially when drilling masonry.
  • Keep spare batteries charged so a dead pack doesn’t stop the project.

A drill-and-driver combo kit is a practical starting point for most homeowners because it covers both drilling and fastening. View on Amazon

A set of masonry bits is needed for concrete and brick work, and carbide-tipped versions hold up better than standard bits. View on Amazon

FAQ

Can a cordless drill be used on concrete?

Yes, but use a hammer-drill mode if your drill has one and carbide-tipped masonry bits. Drilling concrete with a standard drill setting takes much longer and wears out bits quickly.

Is a cordless drill the same as a driver?

Most cordless drills are drill/drivers, meaning they can do both jobs. Some models are drill-only, but the drill/driver is the common type sold for home use.

What size cordless drill do I need for home projects?

A compact 12V to 18V drill covers most hanging, assembly and light repair work. Larger jobs such as decking or framing benefit from a full-size model with more torque.

Conclusion

A cordless drill handles drilling holes, driving screws, mixing materials and, with the right attachments, scrubbing and drilling masonry. Matching the drill’s voltage, torque and features to your typical projects will save time and frustration. Start with a versatile drill/driver, and add specialty bits or attachments as your projects grow.

Emily Parker

About Emily Parker

Emily Parker is part of our editorial team and reviews and edits our power tools guides, checking product details against manufacturer specifications and owner feedback.